Turning Off The Monitoring System; Figure 4-1. Sample Initial Screen - Covidien Nellcor Operator's Manual

To power on the monitoring system:
Press the Power On/Off Button for more than one (1) second.
1.
Ensure the software version, the SpO
2.
indicator light for approximately two (2) seconds.
Ensure the POST pass tone sounds when POST completes.
3.

Note:
Do not use the monitoring system should a repeating, high-pitched alarm tone occur at
power on. Instead, please contact Technical Services or a qualified service technician.

Turning off the Monitoring System

4.3.2
After using the monitoring system, turn it off safely.
To turn off the monitoring system:
Press the Power On/Off button on the right of the device for approximately one second.
1.
Observe the message System is shutting down on the screen.
2.

Note:
Press the Power On/Off button for at least 15 seconds to turn off the monitoring
system after any situation involving continuous resets or a system lock.
Operator's Manual
alarm indicator, and the pulse rate alarm
2
Figure 4-1. Sample Initial Screen
User Interface
27