Toyota Camry Manual page 1118

CONFIRMATION DRIVING PATTERN
(1) Connect the TOYOTA hand–held tester or OBD II scan tool.
(2) Record DTC and the freeze frame data.
(3) Use the TOYOTA hand–held tester to set to Check Mode. (See page DI–3)
(4) Drive the vehicle several times with the engine speed, load and its surrounding range shown with
ENGINE SPD, CALC LOAD in the freeze frame data or MISFIRE RPM, MISFIRE LOAD in the data list.
If you have no TOYOTA hand–held tester, turn the ignition switch OFF after the symptom is simulated
the first time. Then repeat the simulation process again.
HINT:
In order to memorize DTC of misfire, it is necessary to drive around MISFIRE RPM, MISFIRE LOAD in the
data list for the following period of time.
Engine Speed
Idling
1000 rpm
2000 rpm
3000 rpm
(5) Check whether there is misfire or not by monitoring DTC and the freeze frame data. After that, record
them.
(6) Turn the ignition switch OFF and wait at least 5 seconds.
DIAGNOSTICS – ENGINE (5S–FE)
Time
3 minutes 30 seconds or more
3 minutes or more
1 minutes 30 seconds or more
1 minutes or more
Author : Date :
DI–91
326