Overview of Safety Integrated functions
3.1 Safety Integrated Basic Functions
3.1.3
Safe Brake Control (SBC)
Definition according to EN 61800-5-2:
"The SBC function supplies a safe output
signal to control a holding brake."
Example of how the function can be used
Example
The safe control of a motor holding brake must be
guaranteed in order to guarantee the motor is at a
standstill.
How does SBC function in detail?
The converter recogniz-
es the selection ofSTO
via a fail-safe input or
via the safe communica-
tionPROFIsafe.
The converter then safe-
ly switches off the
torque of the connected
motor.
SBC is (if configured)
initiated together with
STO. The Motor Module
/ Safe Brake Relay /
Safe Brake Adapter
then carries out the
action and safely con-
trols the outputs for the
brake.
Details and parameterization
For further details and information on how to parameterize this function, see Section "Safe
Brake Control (SBC) (Page 78)".
42
Safe Brake Control (SBC)
Possible solution
SBC is (if configured) initiated together with
STO. The Motor Module / Safe Brake Relay /
Safe Brake Adapter then carries out the action
and safely controls the outputs for the brake.
Function Manual, 12/2018, 6SL3097-5AR00-0BP1
Safety Integrated