Siemens SINAMICS S120 Function Manual page 291

Safety integrated

Hide thumbs Also See for SINAMICS S120:

Table of Contents

4. Call "STO/SS1/SBC" again.

5. To configure the "SS1" function, set the delay time until the start of "STO" in the "Safe

stop 1 delay time" field.

6. Then connect the signal source r9773.1 for the "STO active in the drive" function.

7. Click the

8. Click "Save project" in the toolbar to save the changes in the project.

9. Accept these settings in the drive: Chapter "Accepting the settings in the drive

You have configured the Safety Integrated Basic Functions.

Safety Integrated

Function Manual, 12/2018, 6SL3097-5AR00-0BP1

button (brake control) to configure the "SBC" function.

Example: Brake control without motor holding brake

Commissioning

6.8 Commissioning: Basic procedure

Show Quick Links

Table of Contents