Siemens SINAMICS S120 Function Manual page 286

Commissioning
6.8 Commissioning: Basic procedure
Making the basic settings for the Safety Integrated Basic Functions
1. Select the setting "Basic Functions" in the first drop-down list:
Figure 6-2
2. Select one of the following settings in the "Control type" drop-down list:
– via PROFIsafe
– via onboard terminals
In the lower part of the screen form the corresponding functions are active.
3. Click the button for the required function.
The corresponding screen form is displayed.
4. Parameterize the function (see Chapter "Basic Functions (Page 288)").
284
Basic Functions
The "Basic functions via onboard terminals" option is automatically active.
Function Manual, 12/2018, 6SL3097-5AR00-0BP1
Safety Integrated