Simons Voss Technologies SmartRelais 3 Advanced Manual page 29

SimonsVoss
Manual
SmartRelais 3 Advanced
IMPORTANT
6.3.2.1 Resetting controller with a USB cable
A reset deletes the programmed settings.
Only the hardware settings and access lists on the controller are reset. The
IP setting remains unchanged
except for the IP settings made during initial programming. The controller
can still be reached using the saved IP address. This means you do not
necessarily need to establish a connection with a USB cable.
The controller can be reset with a USB cable. This option is ideal if the
controller has not yet been installed and can simply be reached physically.
ü Components wired correctly (see wiring [} 55]).
ü Components connected to power.
ü Controller connected to computer with USB cable.
1. Mark the entry on the SmartRelay 3 controller in the matrix.
2. Use | Programming | to select the Read highlighted locking device/set
time item.
6 | Setting up 29 / 135