Battery Replacement - Simons Voss Technologies SmartRelais 3 Advanced Manual

SimonsVoss
Manual
SmartRelais 3 Advanced

10.2 Battery replacement

IMPORTANT
IMPORTANT
4. Select the "TCP nodes" item.
5. Click on the Read button.
ð Locking device is read.
ð Battery level is displayed in the "State" section.
ð Battery level is displayed in the "State during last read-out" section in
the [State] tab in properties.
Do not touch the contacts on the new batteries with your hands when repla-
cing the old ones. Use cotton gloves free of fat or grease.
Dispose of the batteries as per local and country-specific regulations.
ü Controller disconnected from power supply.
1. Press in the controller housing at the indicated point and lift the lid.
ð Housing is open.
2. Use a screwdriver to press the battery locking mechanism to one side
until it releases.
10 | Maintenance 115 / 135