Reader - Simons Voss Technologies SmartRelais 3 Advanced Manual

SimonsVoss
Manual
SmartRelais 3 Advanced

5.2 Reader

Circuit
No. Explanation
board
10 - Reader 1: GND.
11 B1 Reader 1: Data Line B.
12 A1 Reader 1: Data Line A.
Reader 2: Power supply. Voltage is V
13 +2
1 V (PoE).
14 - Reader 2: GND.
15 B2 Reader 2: Data Line B.
16 A2 Reader 2: Data Line A.
Reader 3: Power supply. Voltage is V
17 +3
1 V (PoE).
18 - Reader 3: GND.
19 B3 Reader 3/SmartOutput module: Data Line B.
20 A3 Reader 3/SmartOutput module: Data Line A.
21 04 Serial interface: Open-drain, Data Line 4.
22 03 Serial interface: Open-drain, Data Line 3.
23 02 Serial interface: Open-drain, Data Line 2.
24 01 Serial interface: Open-drain, Data Line 1.
Serial interface: Power supply. Voltage is V
25 0+
12 V - 1 V (PoE).
Input 3: Push to open The relay switches as soon as
26 I3 this contact is connected with I+ (Contact 30), a com-
parable potential or V
27 I2 Input 2: Connection to external components:
28 I1 Input 1: Connection to external components:
29 - Output: GND.
Output: Power supply. Voltage is V
30 I+
(PoE).
1 2 3 4 5
Circuit
No. Explanation
board
1 A RS-485: Data Line A.
2 B RS-485: Data Line B.
3 - GND. Connection for RS-485 bus.
5 | Connections
- 1 V or 12 V -
IN
- 1 V or 12 V -
IN
(Contact 2).
IN
- 1 V or 12 V - 1 V
IN
15 / 135
- 1 V or
IN