Simons Voss Technologies SmartRelais 3 Advanced Manual page 116

SimonsVoss
Manual
SmartRelais 3 Advanced
ATTENTION
ð Battery is now loose in its holder.
3. Remove the battery.
4. Insert a suitable new battery on the holder (see Controller [} 121]).
5. Carefully push the battery downwards until it snaps into position.
ð Battery is inserted.
6. Put the housing lid on again.
7. Carefully push the housing lid downwards until it snaps into position.
ð Battery has now been replaced.
New batteries may not function correctly (due to age, faulty batch or
similar). You can view the battery level in LSM after you change the battery
(see Battery warning [} 111]).
Interruption in the power supply to the RTC
If the battery and the normal power supply are disconnected, the internal
real time clock (RTC) is no longer powered. The clock time will no longer be
correct when the power supply is restored and the authorisations added to
the time zone plans will not be active at the specified times.
1. Implement programming for the controller (see Programming [} 24]).
10 | Maintenance 116 / 135