Epson S5U1C17001C Manual page 68

3 SOfTWarE DEVElOPMEnT PrOCEDUrES
about the debugger windows
This is the [Console] window. Enter a debug command at the "(gdb)" prompt to execute it.
Although we used a button to run a program in Step 56, the same effect can be achieved by entering cont here
and pressing the [Enter] key.
This is the [Registers] window. It shows the contents of the S1C17 Core registers. The register data can be re-
written here.
This is the [Memory] window. It shows the contents of the target memory. The memory data here can be rewrit-
ten.
When run in the above step, the sample program increments the int variable 'i' (addresses 0x0–0x3). Examine
value of the variable 'i' in the [Memory] window.
Step 60: Enter '&i' or '0' in the [Address] text box of the [Memory] window and press the [Enter] key.
3-38
EPSOn
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
S5U1C17001C ManUal