Epson S5U1C17001C Manual page 306

5 gnU17 iDE
general > Workspace
Make settings for IDE operations.
[Build automatically] (default: OFF)
Although this check box is provided to enable or disable the auto-build feature (automatically build a proj-
ect when you save sources you've been editing in the editor), this feature cannot be used in the IDE.
[Refresh automatically] (default: ON)
If this check box is selected, resources in the file system are automatically reflected in the [C/C++ Projects]
and [Navigator] views when added or removed. When this check box is deselected, select [Refresh] from
the [File] menu or the context menu of the view to update the display of the view.
[Save automatically before build] (default: ON)
If this check box is selected, the resources being edited in the editor but not yet saved will be automatically
saved before a build process is executed.
[Workspace save interval (in minutes):] (default: five minutes)
Set the intervals in minutes at which intervals you want the workspace information to be automatically
saved.
[Open referenced projects when a project is opened]
Select whether opening a project will also open other projects it references or not.
[Always] (default: OFF)
Referenced projects will always be opened.
[Never] (default: OFF)
No other projects will be opened.
[Prompt] (default: ON)
A dialog appears to prompt for selection.
5-184
EPSOn
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
S5U1C17001C ManUal