3 SOfTWarE DEVElOPMEnT PrOCEDUrES
Step 23: In the [Arguments:] column, modify the -x option that specifies a command file as shown below.
Before change: -x ${project_name}_gnu17IDE.cmd
After change: -x mycmdfile.cmd
Step 24: Click the [Apply] button to confirm what you've altered here.
Starting the debugger will now execute mycmdfile.cmd.
Step 25: Click the [Close] button if you want to finish here.
To actually start the debugger, click the [Run] button.
See Tutorial 1 for basic debugger operations.
3-52
EPSOn
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
S5U1C17001C ManUal