Table of Contents
Advertisement
11 OTHEr TOOlS
11.11.8 Warning Messages and Error Messages
The following is a list of warning messages displayed by LcdUtil17.
No.
When creating or opening a file
1
A blank document could not be created.
Cause:
Corrective action: Close windows to reduce the number of open windows to 99 or less. Close other
2
Unexpected file format
Cause:
Corrective action: Select a file supported by LcdUtil17.
When entering an input
3
Enter an integer value between ???? and ????.
Cause:
Corrective action: Enter a correct value.
4
Enter an integer.
Cause:
Corrective action: Enter a correct value.
Dot matrix setting window (when Preview button is pressed)
Invalid ???? （???? = position、number of dots、dot size、pitch size、start COM/SEG）
5
Cause:
Corrective action: Enter a correct value.
Invalid ??? start number or Invalid number of dots （??? = COM、SEG）
6
Cause:
Corrective action: Set the Start ???, dot count, and COM/SEG allocation direction in accordance with the
No.
When using [Save as]
7
Some icons/matrixes are out of LCD panel. Remove them? [OK][Cancel]
Cause:
Corrective action: Move the icon or dot matrix so that it does not extend from the LCD panel or click the [OK]
When creating an icon or reading a file
8
The number of the icon is exceeding 4096 pieces.
Cause:
Corrective action: Reduce the total number of icons to less than 4096.
9
The number of the icon is exceeding 4096 pieces. Loaded the icons to 4096 pieces.
Cause:
Corrective action: Reduce the total number of icons to less than 4096.
When creating a matrix or reading a file
10
The number of the matrix is exceeding 10 pieces.
Cause:
Corrective action: Reduce the total number of dot matrices to less than 10.
11-64
Table 11.11.8.1 List of warning messages
A new window could not be opened because more than 100 windows are currently open.
A new window could not be opened due to insufficient memory.
applications to increase available memory.
The file was not in the correct lcd or bmp format. The file was an lcd file with an
unsupported driver.
A value outside the allowed range was entered.
A nonnumeric character was entered in the edit box for integer input.
An invalid value is entered in ????.
The number of COM/SEG allowed by the driver has been exceeded, based on settings for
Start ???, dot count, and COM/SEG allocation direction.
number of COM/SEG allowed by the driver.
An attempt was made to save data while an icon or dot matrix extended from the LCD
panel.
button to remove the icon or dot matrix extending from the LCD panel before saving.
The total number of icons exceeded the maximum value of 4096.
The total number of icons exceeded the maximum value of 4096.
The total number of dot matrices exceeded the maximum value of 10.
EPSOn
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
S5U1C17001C ManUal
Advertisement
Table of Contents
