Epson S5U1C17001C Manual page 551

Deletion method 2
This method is employed in the [Breakpoints] window. Choose the breakpoint you wish to delete by clicking it
in the list in the window, then choose [Remove] from the [Breakpoint] menu. Otherwise, you can choose [Remove
All] from the [Global] menu to delete all breakpoints. For details, see Section 10.4.6, "[Breakpoints] Window".
Notes
• Break numbers are sequentially assigned to each breakpoint you set, beginning with 1. If you do not know
the break number of a breakpoint you wish to delete, use the info breakpoints command to confirm as
in the example above.
• The delete command clears all break settings. To disable a breakpoint temporarily, use the disable or
ignore command.
• Note that specifying a break number not set displays the "No breakpoint number N." message, with no
breakpoints being deleted.
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
EPSOn
10 DEBUggEr
10
Debugger
10-101