Detailed Description Of Commands; Command Name (Operation Of Command)[Supported Modes] - Epson S5U1C17001C Manual

10 DEBUggEr
Classification Command
c17 fwe
Flash writer
c17 fwlp
c17 fwld
c17 fwdc
c17 fwd
Profiler/coverage c17 profilemd
c17 profile
c17 coverage
Other set output-radix Change variable display format
c17 log
source
c17 clockmd
c17 clock
target
detach
pwd
cd
c17 firmupdate
c17 ttbr
c17 help
c17 savewatch
c17 loadwatch
quit
Supported modes: = Can be used, – = Cannot be used, l = Conditional
*1: These commands can be used with the ICD Mini (S5U1C17001H). They cannot be executed normally with the ICD board (an
error message will not be displayed).

10.7.2 Detailed Description of Commands

This chapter describes in detail each debugger command using the format shown below.
Command name
A detailed description of each command begins with the command name in this format.
[Supported modes] shows such modes as ICD Mini and SIM in which the command can be used. You cannot use
the command in modes other than those written here.
Basically, each command is described separately. However, two or more commands (belonging to the same
operation group) that differ only slightly or which can be better understood when explained together are described
collectively.
Operation
Explains the operation of the command.
Format
Shows the format in which the command is entered in the [Console] window and the contents of parameters.
Parameters enclosed in brackets [ ] can be omitted. Otherwise, no parameters can be omitted. The italicized
characters denote parameters specified with numeric values or symbols.
Usage example
Shows an example of how to enter the command and the results of command execution, etc.
GUI
Shows the method (if any) of executing the command other than entering it in the [Console] window. When this
item is not indicated, the command can only be executed in the [Console] window or a command file.
Notes
Describes limitations on use of the command or precautions to be taken when using the command.
Some commands have additional items other than those described above when needed for explanatory purposes.
10-64
Erase program/data
Load program
Load data
Copy target memory
Display flash writer information
Profile/coverage mode setting
Display of profile window
Display of coverage window
Logging
Execute command file
Set execution counter mode
Display execution counter
Connect target
Disconnect target
Display current directory
Change current directory
Update ICD firmware
Set TTBR
Help
Store symbols registered in Watch Window
Register stored symbols to Watch Window
Quit debugger
(operation of command)
EPSOn
Operation
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
Supported modes
Page
iCD Mini SiM
*1
– 10-127
l
*1
– 10-128
l
*1
– 10-129
l
*1
– 10-130
l
*1 10-131
–
l
– 10-132
l
– 10-133
l
– 10-134
l
10-135
10-136
10-137
10-138
10-139
10-140
10-141
10-142
10-142
– 10-143
– 10-144
10-145
10-147
l l
10-148
l l
10-149
[Supported modes]
S5U1C17001C ManUal