Operation Procedure - Epson S5U1C17001C Manual

11.9.6 Operation Procedure

The following shows the basic operation procedure.
(1) loading the device information definition file
First, select a device information definition file (S1C17xxx.ini) and load it.
Select [Device INI Select] from the [Tool] menu or click the [Device INI Select] button.
[Device INI Select] button
The dialog box shown below appears. Enter a file name including the path in the text box or select a file by
clicking the [Ref] button.
Once a device information definition file is selected, the same file is automatically loaded the next time you
start winfog17.
note: When you load a device information definition file after setting up options, all settings are reset to
the default state.
(2) Setup
Select [Setup] from the [Tool] menu or click the [Setup] button to bring up the [Setup] dialog box. From this
dialog box, select items and enter data.
[Setup] button
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
Click [OK], and the file is loaded. If
the specified file exists and there is no
problem with its contents, the option
list and the function option document,
which have both been set by default, are
displayed in each area.
To stop loading the file, click [Cancel].
Date
Displays the current date. Change it as
necessary.
Function Option Document file
Specify the function option document file
name you want to create. The file name
displayed by default can be modified. You
can use the [Ref] button to look at other
folders.
Function Option HEX
Do you make hex file?
Select whether to create a function option
HEX file.
The S1C17 Family does not use a function
option HEX file, so select "No".
EPROM Type
This option is not available for S1C17
Family microcomputers.
EPSOn
11 OTHEr TOOlS
11
Tools
11-37