Epson S5U1C17001C Manual page 281

(6) Select [C/C++ Make Project] from the properties list to display the page for the [Make Builder] tab.
(7) Deselect the [Use default] check box and correct the [Build command:] command line.
Example: Change to the makefile named "user.mak".
${gnu17_loc}/make.exe -f user.mak
(8) Change the following target names to the ones you created. Leave the check boxes selected.
[Build (Incremental Build)]
Specify the target in the makefile called when you execute a build process. By default, "all" is called.
[Clean]
Specify the target in the makefile called when you execute a clean process. By default, "clean" is called.
There is no need to change if the same target names are used in the user makefile.
Leave the [Build on resource save (Auto Build)] check box at the default setting. (The default settings for the
IDE disable this option.)
(9) Click the [OK] button to close the [Properties] dialog box.
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
EPSOn
5 gnU17 iDE
5
IDE
5-159