Creating, Adding, And Editing A Source File - Epson S5U1C17001C Manual

Cmos 16-bit single chip microcomputer, c compiler package for s1c17 family

Hide thumbs Also See for S5U1C17001C:

Table of Contents

3 SOfTWarE DEVElOPMEnT PrOCEDUrES

3.3.3 Creating, adding, and Editing a Source file

The IDE supports C and assembler to allow generation of an object from source files created in those languages.

All source files required to generate an object must be added to the project created earlier.

Creating a source file

Use the IDE editor or a general-purpose editor to create a source file. You can also use an existing source file in

the application you created for the S1C17 Family.

In this tutorial, we will use the source files prepared as examples.

For detailed information on creating a new source file with the IDE, refer to Section 5.5, "The Editor and Edit-

ing Source Files".

adding a source file

Load the source files prepared as samples into the project.

Step 11: Select [Import...] from the [File] menu.

The [Import] wizard will start.

Step 12: From the list displayed, select [General] > [File System] and click the [Next>] button.

(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)

S5U1C17001C ManUal