Working Set - Epson S5U1C17001C Manual

5.4.10 Working Set

It is possible to group only the necessary resources as a working set and to limit the contents displayed in the [C/
C++ Projects] or [Navigator] view to a specified working set. This section describes how to manipulate a working
set in the [C/C++ Projects] view. The procedure described below is the same as for [Navigator] view.
The working set created as described below can also be used to specify a search domain or a project to build during
a build process.
Selecting a working set
note: Working sets must be created in advance.
(1) Select [Select Working Set...] from the toolbar menu (
[Select Working Set] dialog box, which shows a list of the working sets created.
(2) Select a working set from the list and click [OK].
Only the resources defined in the selected working set will be displayed in the [C/C++ Projects] view.
To revert the display in the [C/C++ Projects] view, select [Deselect Working Set] from the toolbar menu (
the [C/C++ Projects] view.
Creating a working set
(1) Select [Select Working Set...] from the toolbar menu (
Working Set] dialog box (shown above).
(2) Click the [New...] button.
This launches the [New Working Set] wizard.
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
) in the [C/C++ Projects] view. This displays the
t
) in the [C/C++ Projects] view to display the [Select
t
EPSOn
5 gnU17 iDE
5
IDE
) in
t
5-69