Epson S5U1C17001C Manual page 666

(5) Correcting an existing document file
You can read an existing function option document file into winfog17 and correct it as necessary.
To read a file, select [Open] from the [File] menu or click the [Open] button.
[Open] button
The dialog box shown below appears, so enter a file name including the path in the text box or select a file by
clicking the [Ref] button.
Click [OK], and the file is loaded. If the specified file exists and there is no problem with its contents, the
option list and the function option document areas are updated according to the contents of the file. To stop
loading the file, click [Cancel].
Perform steps (2) to (4) to update the file.
If you select [Generate] without changing the file name, the message shown below is displayed asking you
whether or not to overwrite the file. Click [Yes] to overwrite or [No] or [Cancel] to stop overwriting. Use the
[Setup] dialog box to change the file name.
note: The function option document file can be read only when the device information definition file has
been loaded.
(6) Quitting
To terminate winfog17, select [End] from the [File] menu.
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
EPSOn
11 OTHEr TOOlS
11
Tools
11-39