Editing A Linker Script - Epson S5U1C17001C Manual

5 gnU17 iDE

5.7.8 Editing a linker Script

A linker script file is used to pass location information on object files comprising the executable file (.elf) to the
linker. The IDE generates a linker script file "<project name>_gnu17IDE.lds" according to the settings dis-
cussed in this section.
The procedure for setting a linker script is described below. For detailed information on sections and linker scripts,
refer to Section 3.8, "Sections and Linkage", and Chapter 9, "Linker".
linker script setup page
Use the [GNU17 Linker Script Settings] page of project properties to set a linker script.
Do the following to display the setup page:
(1) Select a project to build in the [C/C++ Projects] or [Navigator] view.
(2) Select [Properties] from the [Project] menu or from the context menu in the above view.
This displays the [Properties] dialog box.
(3) Select [GNU17 Linker Script Settings] from the properties list.
The list shows the configuration and location of sections in an executable file (.elf). This memory map is shown
in Figure 5.7.6.1.
5-130
EPSOn
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
S5U1C17001C ManUal