Epson S5U1C17001C Manual page 87

Cmos 16-bit single chip microcomputer, c compiler package for s1c17 family

Hide thumbs Also See for S5U1C17001C:

Table of Contents

Step 2: Select "S1C17701" from the [Target CPU Device] combo box.

"S1C17" is provided for simulating the S1C17 Core only and selecting it will not launch ES-Sim17 at the start

of debugging.

Select "S1C17" when debugging the program in simulator mode without ES-Sim17. When debugging the pro-

gram using an ICD (in ICD Mini mode), ES-Sim17 will not start up regardless of how the target CPU has been

The models displayed in the list may be added/deleted by the configuration file that will be modified when a

new model is released or an existing model is discontinued.

Step 3: Configure the memory model and vector section as necessary, then terminate the wizard by clicking

the [Finish] button.

After that, edit source files and build them as usual.

The target CPU can also be specified on the [GNU17 General] page of the [Preferences] dialog box similar to

Creating a debugger command file for simulator mode

The ES-Sim17 will be able to run only when the debugger is running in simulator mode. The following shows

the operations on the IDE to launch the debugger in simulator mode.

Step 4: Display the [Properties] dialog box by selecting [Properties] from the [Project] menu and open the

[GNU17 GDB Commands] page.

S5U1C17001C ManUal

(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)

3 SOfTWarE DEVElOPMEnT PrOCEDUrES