C17 Fwd (Display Flash Writer Information)[Icd Mini] - Epson S5U1C17001C Manual

10 DEBUggEr
c17 fwd
(display flash writer information)
Operation
This is a dedicated command for the flash writer of the S5U1C17001H.
It displays information on the data and erase/write program loaded in the S5U1C17001H.
Format
c17 fwd
Display
(gdb) c17 fwd
CPU data address
Data size
Erase start block
Erase end block
Erase parameter
Comment : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
CPU program address
Program size
Erase routine entry address : xxxxxxxx
Write routine entry address : xxxxxxxx
Comment : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Information about the address and size of flash write data, and range of flash memory to be erased are displayed
in the first half, as set by the c17 fwld or c17 fwdc command.
Information about the start address and size of the flash erase/write program, and entry addresses of the erase/
write routines are displayed in the latter half, as set by the c17 fwlp command.
Notes
• This command cannot be used in simulator mode.
• This command can be used with the ICD Mini (S5U1C17001H). It cannot be executed normally with the
ICD board (an error message will not be displayed).
10-130
: xxxxxxxx
: xxxxxxxx
: xxxxxxxx
: xxxxxxxx
: xxxxxxxx
: xxxxxxxx
: xxxxxxxx
EPSOn
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
[ICD Mini]
S5U1C17001C ManUal