Epson S5U1C17001C Manual page 65

Cmos 16-bit single chip microcomputer, c compiler package for s1c17 family

Hide thumbs Also See for S5U1C17001C:

Table of Contents

Notice that the for statement in the [Source] window is highlighted in green. This is because the current ad-

dress of the PC (program counter) exists there, at which the program has stopped. Furthermore, notice that the

'pc' column of the [Registers] window indicates the address 0x8094. It means that the program has stopped im-

mediately before executing the instruction at this address.

Although boot.s was displayed in the [Source] window when the program has started, the source of main.c

is displayed in it because the program has stopped and remains idle in main.c now.

The [Source] window can display a program in other than the source mode.

To change the display mode of the [Source] window

There is the pulldown list box that shows SOURCE in the toolbar. Use it to specify the display mode of the

[Source] window.

Step 58: Select "SOURCE", "ASSEMBLY", "MIXED", or "SRC + ASM" in the pulldown list

S5U1C17001C ManUal

(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)

to change display modes.

3 SOfTWarE DEVElOPMEnT PrOCEDUrES