Additional Description On Dialog Boxes; Properties For Project - Epson S5U1C17001C Manual

5.10 additional Description on Dialog Boxes

This section discuss dialog boxes that may require additional description. Not discussed are dialog boxes described
in the body text, standard Windows dialog boxes and equivalents, and simple confirmation dialog boxes involving
simply [OK] and [Cancel] buttons.

5.10.1 Properties for Project

This dialog box is used to display properties and change settings for the currently selected project. This dialog box
appears when you select [Properties] from the [Project] menu or from the context menu for the [C/C++ Projects]
or [Navigator] view. The 15 categories prepared in the properties list to the left allow you to display the page for a
category by clicking from a list. The dialog boxes corresponding to each category page are described below.
Also described below are buttons appearing on every page.
[Restore Defaults]
Restores the content of each page to the state in which the dialog box was opened or the state in which the dia-
log box settings were confirmed with the [Apply] button.
[Apply] *
Applies the changes and content set on the page. Click [Apply] before proceeding to another page if you want
to change other properties.
[OK] *
Applies the changes and content set on the current page and closes the dialog box.
[Cancel]
Cancels the settings and closes the dialog box. Contents not already confirmed with the [Apply] button before
canceling do not revert to their former state.
*
If you click the [Apply] or [OK] button after settings in a [GNU17 Build Options] or [GNU17 General] page
have been changed, a dialog box appears for selecting "clean" build (see Section 5.7.8) to delete the files cre-
ated with the previous settings (and rebuild).
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
EPSOn
5 gnU17 iDE
5
IDE
5-203