Setup - NetComm NTC-220 User Manual

Setup

The Setup page provides the options to enable or disable the SMS messaging functionality and SMS forwarding
functionalities of the router. SMS messaging is enabled by default.
O P T I O N
General SMS configuration
SMS messaging
Messages per page (10-
50)
Encoding scheme
SMS forwarding configuration
Forwarding
Redirect to mobile
TCP server address
TCP port
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 125 – General SMS Configuration
Toggles the SMS functionality of the router on and off.
The number of SMS messages to display per page. Must be a
value between 10 and 50.
The encoding method used for outbound SMS messages. GSM
7-bit mode permits up to 160 characters per message but drops
to 50 characters if the message includes special characters. UCS-2
mode allows the sending of Unicode characters and permits a
message to be up to 50 characters in length.
Toggles the SMS forwarding function of the router on and off.
Enter a mobile number as the destination for forwarded SMS
messages.
Enter an IP address or domain name as the destination for
forwarded SMS messages using TCP.
The TCP port on which to connect to the remote destination.
D E F I N I T I O N
122 of 193
© NetComm Wireless 2019