QuickSetup; Setup Procedure - NetComm LIBERTY SERIES User Manual

Quick Setup

2.1 Setup Procedure

These steps explain how to quickly setup your 3G Router:
1. Attach the 3G antenna provided to the port marked Main on the back of the router. The antenna should be screwed
in a clockwise direction.
2. Insert your SIM card (until you hear a click) into the USIM slot at the back of the Router.
3. Connect the yellow networking cable to one of the yellow ports found at the back of the Router.
4. Connect the other end of the yellow networking cable to the port on your computer.
5. If required, connect a standard Analogue Telephone to the port labeled "Phone" using an RJ-11 Cable (not included)
6. Connect the power adapter to the Power socket on the back of the Router.
7. Plug the power adapter into the wall socket and press the power button into the ON position (in).
8. Configure the router through the Web User Interface (WUI).
NOTE: Chapters 3 through 8 explain how to setup and use the WUI
9. Save the router configuration and reboot (see section 6.4).
YML10WVR2
www.netcommlimited.com
3G Tower
HSPA+ WIFI ROUTER WITH VOICE
Laptop
Smart Phone
Printer USB Storage
OR
Telephone
Computer
Computer
HSPA+ WIFI ROUTER WITH VOICE User Guide
NETCOMM LIBERTY SERIES
9