Destinations - NetComm NTC-220 User Manual

E V E N T
GPS GEOFENCE status
change

Destinations

A "destination" is a profile on the router containing the contact details of a recipient of event notification alerts i.e.
the e-mail address, SMS number, TCP or UDP server addresses of the recipient. The destination profile must
contain the details of at least one destination type in order to be used.
Configuring Event notification
To configure the event notification feature:
1 Click the Services menu item at the top of the screen. From the Event notification menu on the left of the
screen, select the Destination configuration menu item.
2 Click the +Add button at the top right corner of the window. The Event destination edit screen is displayed.
3 In the Destination name field enter a name for the destination profile then enter the contact details for the
each type of destination i.e. Email address, TCP address and port, UDP address and port and/or SMS
number.
4 Click the Save button when you have entered the required details.
5 From the Event notification menu on the left of the screen, select the Notification configuration menu item.
6 Select the Enable event notification toggle key to turn it to the ON position.
7 If desired, set the Maximum event buffer size, Maximum retry count, Event notification log file and Event
notification prefix fields. See table 29 for descriptions of these options.
8 From the Destination profile column, use the drop-down menus to select the desired destination profiles to
use for the corresponding events, then select the checkboxes for the types of notifications to send to the
chosen destination profile. If the Destination profile does not contain the required contact details, a pop-up
warns you to enter the required details in the Destination profile.
9 Click the Save button.
Note – If you have selected the Email notification type for any of the events, you must also configure Email client settings to allow the
router to send e-mail messages.
Destination configuration
The Destination configuration screen displays a list of the destination "profiles" that have been configured on the
device as well as providing the option to add new profiles.
NTC-220 – User Guide
UG01028 v1.2 March 2019
E V E N T
D E S C R I P T I O N
I D
24 Notification is sent based on the
Geofence settings.
Table 33 – Event notification – event types
Figure 123 – Event destination list
E X A M P L E M E S S A G E
GPS GEOFENCE status
changed(latitude: -33.807242,
longitude: 151.148293, radius 15 km):
out → in
© NetComm Wireless 2019
118 of 193