Ipsec Log - NetComm NTC-220 User Manual

I T E M
Maximum kernel panic
data size (KB)
Log capture information
Number of captured
periodic logs
Captured kernel panic
data (KB)
Clear all captured
periodic logs
Download all captured
logs

IPSec log

The IPSec log section provides the ability for you to download the log for the IPSec VPN function. This can assist in
troubleshooting any problems you may have with the IPSec VPN. To access the IPSec log page, click on the System
menu item then select the Log menu on the left and finally select IPSec log beneath it.
Use the Log level drop-down list to specify the type of detail you want to capture in the log and then click the Save
button. When you change the logging level, any active IPSec VPN tunnels will be disconnected as a change in
logging level requires the IPSec service to be restarted.
When the Log level is set to Filtered log the Log filter drop-down menu contains 13 filters. Select one or multiple
filters (hold down Ctrl and select for Windows, Cmd and select for Mac) and click Save to apply the filter(s).
The Update button forces a refresh of the display to show any entries since the display was last loaded. To
download the IPSec log, click the Download button and you will be prompted to save the file.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Specifies the maximum size of the kernel panic data file in
kilobytes.
Displays the number of captured periodic logs.
Displays the total size of captured kernel panic data in kilobytes.
Press the "Clear" button to clear all captured periodic logs.
Press the "Download" button to download all captured logs.
Table 47 – Diagnostic log
Figure 133 – IPSec log
D E S C R I P T I O N
142 of 193
© NetComm Wireless 2019