NetComm NTC-220 User Manual page 31

Connecting to the mobile broadband network
The router supports the configuration of up to six APN profiles; these profiles allow you to configure the settings
that the router will use to connect to the 4G/3G network and switch easily between different connection settings.
For advanced networking purposes, you may activate a maximum of two profiles simultaneously (dependent on
network support). When activating two connection profiles, you should avoid selecting two profiles with the same
APN as this can cause only one profile to connect. Similarly, activating two profiles which are both configured to
automatically determine an APN can cause a conflict and result in neither profile establishing a connection. We
recommend that the two active connection profiles have differing, manually configured APNs to avoid connection
issues and ensure smooth operation.
Manually configuring a connection profile
To manually configure a connection profile:
1 Click the edit button corresponding to the Profile that you wish to modify. The Data connection profile
settings page is displayed.
2 Click the Profile toggle key to turn the profile ON.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 23 – Data connection profile settings
Figure 24 – Data connection settings – Profile turned on
31 of 193
© NetComm Wireless 2019