System Configuration; Settings Backup And Restore - NetComm NTC-220 User Manual

System configuration

Settings backup and restore

The settings backup and restore page is used to backup or restore the router's configuration or to reset it to
factory defaults. In order to view the settings page, you must be logged into the web user interface as root using
the password admin. The backup / restore functions can be used to easily configure a large number of NTC-220
series routers by configuring one router with your desired settings, backing them up to a file and then restoring
that file to multiple NTC-220 series routers.
To access the Settings backup and restore page, click on the System menu item then select the System
configuration menu on the left and finally select Settings backup and restore beneath it.
Back up your router's configuration
1 Log in to the web configuration interface, click the System menu and select Settings backup and restore.
2 If you want to password protect your backup configuration files, enter your password in the fields under Save
a copy of current settings and click Save.
If you do not want to password protect your files, just click on Save. The router will then prompt you to select
a location to save the settings file.
Note – The following conditions apply:
• It is NOT possible to edit the contents of the file downloaded; if you modify the contents of the configuration file in any
way you will not be able to restore it later.
•
You may change the name of the file if you wish but the filename extension must remain as ".cfg"
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 137 – Settings backup and restore
146 of 193
© NetComm Wireless 2019