Quick Setup; Setup Procedure - NetComm 3G42W-M User Manual

Hide thumbs Also See for 3G42W-M:

Table of Contents

3. Quick Setup

These steps explain how to quickly setup your Connect Router:

1. Insert your SIM card (until you hear a click) into the USIM slot on the rear of the Router.

2. Connect the yellow Ethernet cable to one of the yellow LAN ports found at the back of the Router.

3. Connect the other end of the yellow networking cable to the Ethernet port on your computer.

4. Connect the power adapter to the Power socket on the back of the Router.

5. Plug the power adapter into a wall socket and press the power button into the ON position.

6. Configure the Router through the Web User Interface (WUI).

7. Save the Router configuration and reboot .

YML42

www.netcomm.com.au

NETCOMM LIBERTY™ SERIES - HSPA+ 42Mbps WiFi Router

HSPA+ 42Mbps WiFi Router User Guide

Table of Contents