Upload - NetComm NTC-220 User Manual

Restore your backup configuration
1 In the web configuration interface click on the System menu and select Settings backup and restore.
2 From the Restore saved settings section, click on Browse or Choose a file and select the backup
configuration file on your computer.
3 Click Restore to copy the settings to the new NTC-220 series router. The router will apply these settings and
inform you it will reboot - click on OK.
Restoring the router's factory default configuration
Click the Restore defaults button to restore the factory default configuration. The router asks you to confirm that
you wish to restore factory default settings. If you wish to continue with the restoring of factory defaults, click OK.
Note – All current settings on the router will be lost when performing a restore of factory default settings. The device IP address will
change to 192.168.1.1 and the default username root and default password user will be configured.

Upload

To access the Upload page, click on the System menu, then System Configuration and then Upload.
The Upload page allows you to upload firmware files, HTTPS certificates or user-created application packages to
the NTC-220 series router. When firmware files have been uploaded, they can also be installed from this page. PDF
files, such as this user guide may also be uploaded for access on the router's help page.
For more information on application development, contact NetComm Wireless about our Software Development
Kit.
Updating the Firmware
The firmware update process involves first updating the recovery image firmware and then updating the main
firmware image.
Note – In order to perform an update, you must be logged into the router with the root manager account (see the Advanced configuration
section for more details).
To update the NTC-220 series router's firmware:
1 Power on the router as described in the Installing the router section.
2 Log in to the router with the root user account (See the Advanced configuration section for details)
3 Select the System item from the top menu bar, select the System configuration item from the menu on the
left and then select the Upload menu item.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 138 – Upload page
147 of 193
© NetComm Wireless 2019