Ethernet Wan/Lan; Ethernet Interface Assignment - NetComm NTC-220 User Manual

Ethernet WAN/LAN

The Ethernet WAN/LAN pages provide configuration options for the two built-in Ethernet ports and any USB-to-
Ethernet ports you may connect.

Ethernet interface assignment

The Ethernet assignment page displays the Ethernet interfaces and allows you to configure whether they operate
in LAN or WAN mode.
To access the Ethernet assignment page, click on the Networking menu at the top of the screen, click on the
Ethernet WAN/LAN menu on the left then select the Interface assignment menu item.
The default failover sequence is as follows:
1 Ethernet WAN
2 USB to Ethernet adapter (if configured)
3 WWAN
O P T I O N
No.
Description
Name
Link status
MAC
Port
Configuration Use the drop-down list to select whether the port operates in LAN mode,
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 53 – Ethernet group configuration
A number identifying the interface on the router.
A description of the type of interface.
The name used to identify the interface on the router.
Displays whether the interface is inserted
The MAC address of the interface.
The type of port.
WAN mode or is disabled.
Table 14 – Ethernet group configuration items
D E F I N I T I O N
48 of 193
© NetComm Wireless 2019