NetComm NTC-220 User Manual page 139

D E S C R I P T I O N
Send SMS to wake up the router, turn on the
default gateway and trigger the 'connect on
demand' profile if in waiting state.
Send SMS to perform firmware upgrade
when firmware is located on HTTP server
Send SMS to perform firmware upgrade
when firmware is located on FTP server
Send SMS to download and install IPK
package located on HTTP server
Send SMS to download and install IPK
package located on FTP server
Send SMS to turn off PPPoE
Send SMS to retrieve the PPPoE status,
currently configured dial string and service
name
Send SMS to set the LED mode timeout to
10 minutes
Send SMS to retrieve the current LED mode
Retrieve current SSH protocol
Select SSH protocol
Retrieve password authentication status
Enable/disable password authentication on
host
Generate set of public/private keys on the
host
Clear client public keys stored on host
Send SMS to initiate a Network Quality test
NTC-220 – User Guide
UG01028 v1.2 March 2019
I N P U T C O M M A N D ( W I T H O U T P A S S W O R D P R E F I X )
A zero byte class 1 flash SMS
execute download
http://download.com:8080/firmware_image.cdi
execute download
http://download.com:8080/firmware_image_r.cdi
execute download
ftp://username:password@download.com/firmware_image.cdi
execute download ftp://username:password@
download.com/firmware_image_r.cdi
execute download http://download.com:8080/package.ipk
execute download ftp://username:password@
download.com:8080/package.ipk
set pppoe=0
get pppoe
set ledmode=10
get ledmode
get ssh.proto
set ssh.proto=1
get ssh.passauth
set ssh.passauth=1 or set ssh.passauth=0
execute ssh.genkeys
execute ssh.clearkeys
get networkquality
Table 45 – SMS diagnostics example commands
139 of 193
© NetComm Wireless 2019