Operator settings
The operator settings feature allows you to select whether to allow the router to automatically select a network or
to manually scan for a network to which the router is locked.
To scan for available networks, set the Select operator mode from Automatic to Manual then click the Scan
button. This operation can take a few minutes and requires that the packet data session be disconnected prior to
scanning.
A list of the detected service carriers in your area is displayed.
Select the most appropriate service from the list shown and click Apply.
When Select operator mode is set to Automatic, the router selects the most appropriate operator based on the
inserted SIM card. This is the default option and is sufficient for most users.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 39 – Operator settings
Figure 40 – Detected operator list
39 of 193
© NetComm Wireless 2019