Placement Of The Router; Mounting Options; Mounted Flat Against The Wall - NetComm NTC-220 User Manual

Placement of the router

The external high-performance antennas supplied with the router are designed to provide optimum cellular and
WiFi signal strength in a wide range of environments. If you find the signal strength is weak, try adjusting the
orientation of the antennas. If you are unable to get an acceptable signal, try moving the router to a different place
or mounting it differently.
Note – When selecting a location for the router, allow at least 20 seconds for the signal strength LEDs to update before trying a different
location.

Mounting options

The NTC-220 series router can be quickly and easily mounted in a variety of locations.

Mounted flat against the wall

When mounted flat against the wall, the NTC-220 series router has a slimline form factor. Use appropriately sized
screws in the mounting holes provided on the base of the unit.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 6 – Wall mount – Flat against the wall
15 of 193
© NetComm Wireless 2019