Ethernet Wan - NetComm NTC-220 User Manual

Ethernet WAN

The Ethernet WAN configuration page allows you to configure the connection type and metric of the available
WAN connections. To access the Ethernet WAN page, click on the Networking menu at the top of the screen, click
on the Ethernet WAN/LAN menu on the left then select the WAN configuration menu item.
O P T I O N
WAN Ethernet
Connection Type
IP address
Subnet mask
Gateway
DNS server 1 IP address The first DNS server for the WAN interface.
DNS server 2 IP address The second DNS server for the WAN interface.
Metric
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 54 – Ethernet WAN configuration
Use this field to select the WAN interface to configure.
Selects whether the WAN interface has static IP settings or
DHCP.
The IP address to assign to the selected WAN interface.
The Subnet mask of the IP address above.
The gateway to assign this WAN interface.
The metric value is used to define the priority of the interface.
Lower metric values indicate higher priority.
Table 15 – Ethernet WAN configuration options
D E F I N I T I O N
49 of 193
© NetComm Wireless 2019