Event Types - NetComm NTC-220 User Manual

Event types

There are twenty-one events for which you can configure alerts. Hovering the mouse over the event description
provides more details of event notification type.
E V E N T
Unit powered up
Unit rebooted
Link status change
WWAN IP address change
WWAN Registration
change
WWAN Cell ID change
WWAN technology change
Number of connected
Ethernet interfaces change
Login status
FOTA/DOTA status
Button settings change
VRRP mode change
USB OTG status change
NTC-220 – User Guide
UG01028 v1.2 March 2019
E V E N T
D E S C R I P T I O N
I D
1 Notification is sent when the unit is
powered up through connection of
a power source or after a soft-reset.
2 Notification is sent when the unit is
rebooted via Web UI, SMS
diagnostics or via command
line/telnet session.
3 Notification is sent if the status of
the data connection profile or any
IPSec/OpenVPN/PPTP/GRE tunnel
endpoint changes i.e. the link goes
up or down.
4 Notification is sent if an active data
connection profile's WWAN IP
address changes.
5 Notification is sent if the network
registration status changed
between "registered",
"unregistered" or "roaming".
6 Notification is sent if the router
connects to a different cell, marked
by a changed in the Cell ID.
7 Notification is sent if the router
connects to a different network
technology, e.g. 3G/2G.
8 Notification is sent if there is a
change to the number of directly
connected Ethernet interfaces.
10 Notification is sent if there was a
failure to log in to the router via the
Web UI.
20 Notification is sent with the result
of the Firmware Over-The-Air via
SMS or TR-069.
21 Notification is sent when the reset
button enabled or disabled in the
web user interface.
22 Notification is sent if a device
configured as a slave becomes a
master router or returns to slave
status.
23 When a USB device is connected.
E X A M P L E M E S S A G E
Power is up
Rebooting triggered by internal
application
Profile 1 WWAN status changed : down
-> up
WWAN IP address changed : N/A -->
10.103.4.149
WWAN registration status changed :
Not registered --> Registered to home
network
Cell ID changed : --> 15224145
Cell ID changed : 15224148 -->
15224145
WWAN network changed : N/A() -->
3G(UMTS)
WWAN network changed : 3G(UMTS) -
-> 2G(GSM)
Ethernet device number changed : 0 --
> 1
WEBUI login failed, username root,
password
FOTA/DOTA: upgrading firmware
successful
Reset button is enabled
VRRP is in backup mode
USB OTG status changed: disabled →
connected
© NetComm Wireless 2019
117 of 193