Odometer - NetComm NTC-220 User Manual

I T E M
A-GPS Enable
Maximum Retry Count
Retry delay (minute)
Automatic Update Period
(day)
The GNSS data last update field represents the time that the GNSS data file was created while the GNSS data
expires field indicates the time that this data is valid until. The A-GPS last update field specifies the last time the
router attempted to retrieve an update to the GNSS data.
You may manually force the router to check for an update regardless of the next scheduled update time by clicking
the Update Now button.
When you have finished configuring the settings, click the Save button to save the changes.

Odometer

To access the Odometer screen, select the Services item from the top menu bar then the GPS item on the left.
Finally, select the Odometer menu item.
The GPS may be used to record the distance that the router has travelled. To do this, set the Odometer toggle key
to the ON position as in the screenshot below. You can toggle the unit of measurement by clicking the Display
imperial / Display metric button. The threshold setting adjusts the router's sensitivity to movement so that
movement within the specified radius from the starting point does not register as distance travelled. When you
have finished configuring the Odometer settings, click the Save button to ensure the settings are stored on the
router.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 116 – Mobile Stations Based Assisted GPS configuration options
Enables or disables the mobile station based assisted GPS
function.
Sets the maximum number of times the router should attempt
to triangulate its position.
Sets the number of minutes the router should wait between
attempts to triangulate its position.
Sets the number of days that the router should automatically
update the A-GPS data. The maximum update period is 7 days.
Table 27 – Mobile Station Based Assisted GPS configuration options
D E S C R I P T I O N
108 of 193
© NetComm Wireless 2019