NetComm NTC-220 User Manual page 37

O P T I O N
Verbose mode
The router provides the option of logging all the data activity which matches the settings for the Connect on
demand feature for advanced troubleshooting purposes. To enable the recording of detailed logs, click the Enable
verbose mode toggle key to switch it ON. See the System log section for more information.
Manually connecting/disconnecting
There may be times when you need to either force a connection to be made or force a disconnection manually.
You can use the Manual connect and Manual disconnect buttons to do this whenever necessary. The online status
of the connection is displayed above the buttons.
When you have finished configuring the options for the Connect on demand feature, click the Save button at the
bottom to save your changes.
SMS Wake up
The router can also be woken up by means of an SMS message using the SMS diagnostics feature by sending a
zero byte class 1 flash SMS. See the
NTC-220 – User Guide
UG01028 v1.2 March 2019
every time (2 minutes) and then randomly selects a time less than or
equal to the Randomise connect frequency by up to time (1 minute).
After the randomly selected time has elapsed, the router dials the
connection. After the first dial, the router dials the connection every
2 minutes, ignoring the Randomise connect frequency by up to time.
Table 12 – Connect on demand – Connect and disconnect timers descriptions
Figure 35 – Connect on demand – Verbose logging configuration
Figure 36 – Connect on demand – Online/Offline control
Diagnostics section for details on using the SMS Wake up function.
D E S C R I P T I O N
37 of 193
© NetComm Wireless 2019