NetComm NTC-220 User Manual page 87

Serial port (generic): When a USB to Serial cable is used, this creates a generic serial port as an endpoint
defaulting to the commonly used settings as shown below.
TCP server: This creates a TCP server endpoint with the following options available.
TCP client: This creates a TCP client endpoint with the following options available. The retry timeout period
specifies the number of seconds to wait between attempts to re-establish a connection in the event that it is
lost. The client will attempt re-connection indefinitely every Retry timeout interval.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 92 – Serial port (generic) endpoint configuration
Figure 93 – TCP server endpoint configuration
Figure 94 – TCP client endpoint configuration
87 of 193
© NetComm Wireless 2019