NetComm NTC-220 Series Console Manual
Hide thumbs
Also See for NTC-220 Series:
- User manual (193 pages) ,
- Connecting manual (24 pages) ,
- Firmware upgrade manual (10 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for NetComm NTC-220 Series
Summary of Contents for NetComm NTC-220 Series
- Page 1 Recovery via Recovery Console Guide NTC-220 Series Doc No. FA01392...
-
Page 2: Document History
Copyright© 2021 NetComm Wireless Limited. All rights reserved. NetComm Wireless Limited was acquired by Casa Systems, Inc. a Delaware company on 1 July 2019. The information contained herein is proprietary to Casa Systems, Inc. No part of this document may be translated, transcribed, reproduced, in any form, or by any means without prior written consent of Casa Systems, Inc.. - Page 3 This document outlines the process of booting an NTC-220 series router into recovery mode and flashing the main firmware image to restore functionality in the case where a failure has occurred.
- Page 4 Click the Upload button to begin the transfer of the firmware file to the router. When the file has completed uploading, click on the Install link next to the firmware image file. NTC-220 Series – Recovery via Recovery Console Guide 4 of 6 FA01392 v1.0 28 September 2021...
- Page 5 To ensure that the router runs correctly, it is necessary to perform a restore to the factory default settings. This means that any previous settings on the router are erased. NTC-220 Series – Recovery via Recovery Console Guide 5 of 6 FA01392 v1.0 28 September 2021...
- Page 6 Click on the Retore button. The router resets all settings to the factory defaults and reboots to the main firmware. The recovery process is complete. NTC-220 Series – Recovery via Recovery Console Guide 6 of 6 FA01392 v1.0 28 September 2021...