NetComm NTC-220 User Manual page 47

Address reservation list
DHCP clients are dynamically assigned an IP address as they connect, but you can reserve an address for a
particular device using the Address reservation list.
To add a device to the address reservation list:
1 Click the +Add button.
2 In the Computer Name field enter a name for the device.
3 In the MAC Address field, enter the device's MAC address.
4 In the IP Address fields, enter the IP address that you wish to reserve for the device.
5 If the Enable toggle key is not set to ON, click it to switch it to the ON position.
6 Click the Save button to save the settings.
Dynamic DHCP client list
The Dynamic DHCP client list displays a list of the DHCP clients. If you want to reserve the current IP address for
future use, click the Clone button and the details will be copied to the address reservation list fields. Remember to
click the Save button under the Address reservation list section to confirm the configuration.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 51 – DHCP – Address reservation list
Figure 52 – Dynamic DHCP client list
47 of 193
© NetComm Wireless 2019