Diagnostic Log - NetComm NTC-220 User Manual

Select a Display level from the drop-down menu to filter the message display.
To download the System log for offline viewing, right-click the Download button and choose Save as.. to save the
file. The downloaded log file is in Linux text format with carriage return (CR) only at the end of a line, therefore in
order to be displayed correctly with new lines shown, it is recommended to use a text file viewer which displays this
format correctly (e.g. Notepad++).
To clear the System log, click the Clear button.

Diagnostic log

The router may be configured to enable the collection of diagnostic logs for the purpose of troubleshooting
problems. These log files are intended for use by NetComm Wireless technicians. By default, this feature is
disabled and should only be enabled if you are trying to find out the cause of a problem and are instructed to
enable this by NetComm Wireless technical support staff.
I T E M
Diagnostic log configuration
Periodic log collection
Log capture interval
Maximum periodic log
size (KB)
NTC-220 – User Guide
UG01028 v1.2 March 2019
I T E M
Debug Show extended system log messages with full
debugging level details.
Info Show informational messages only.
Notice Show normal system logging information.
Warning Show warning messages only.
Error Show error condition messages only.
Table 46 – System log detail levels
Figure 132 – Diagnostic log
Turn on this toggle key to enable diagnostic log collection.
Specifies the interval at which the router should collect diagnostic
log data.
Specifies the maximum size of the log file in kilobytes.
D E F I N I T I O N
D E S C R I P T I O N
141 of 193
© NetComm Wireless 2019