NetComm NTC-220 User Manual page 191

Do not expose your device or its accessories to open flames or lit tobacco products.
Do not expose your device or its accessories to liquid, moisture or high humidity.
Do not drop, throw or try to bend your device or its accessories.
Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories.
Do not paint your device or its accessories.
Do not attempt to disassemble your device or its accessories, only authorised personnel must do so.
Do not expose your device or its accessories to extreme temperatures. Ensure that the device is installed in an area
where the temperature is within the supported operating temperature range:
Class A: -30°C to +70°C
Class B: -40°C to +85°C (with possible performance deviation)
Do not use your device in an enclosed environment or where heat dissipation is poor. Prolonged use in such space
may cause excessive heat and raise ambient temperature, which will lead to automatic shutdown of your device or
the disconnection of the mobile network connection for your safety. To use your device normally again after such
shutdown, cool it in a well-ventilated place before turning it on.
Please check local regulations for disposal of electronic products.
Do not operate the device where ventilation is restricted
Installation and configuration should be performed by trained personnel only.
Do not use or install this product near water to avoid fire or shock hazard. Avoid exposing the equipment to rain or
damp areas.
Arrange power and Ethernet cables in a manner such that they are not likely to be stepped on or have items
placed on them.
Ensure that the voltage and rated current of the power source match the requirements of the device. Do not
connect the device to an inappropriate power source.
Small children
Do not leave your device and its accessories within the reach of small children or allow them to play with it.
They could hurt themselves or others, or could accidentally damage the device.
Your device contains small parts with sharp edges that may cause an injury or which could become detached and
create a choking hazard.
Demagnetisation
To avoid the risk of demagnetisation, do not allow electronic devices or magnetic media close to your device for a
long time.
Avoid other magnetic sources as these may cause the internal magnetometer or other sensors to malfunction and
provide incorrect data.
Electrostatic discharge (ESD)
Do not touch the SIM card's metal connectors.
Air Bags
Do not place the device in the area near or over an air bag or in the air bag deployment area
NTC-220 – User Guide
UG01028 v1.2 March 2019
191 of 193
© NetComm Wireless 2019