NetComm NTC-220 User Manual page 109

I T E M
Odometer reading
Display imperial /
Display metric
Odometer start time
Reset odometer
Odometer
Threshold
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 117 – Odometer options
The number of metres/kilometres that the device has travelled
since the time listed in the Odometer start time field.
Toggles the Odometer reading between metric and imperial
measurements.
The time that recording of distance travelled began.
Resets the odometer reading to 0 and the Odometer start time to
the current time.
Toggles the Odometer function on and off.
Specifies the minimum distance that the router must travel from its
current position before the Odometer reading increases.
Table 28 – Odometer configuration options
D E S C R I P T I O N
109 of 193
© NetComm Wireless 2019