List Of Get/Set Commands - NetComm NTC-220 User Manual

I T E M C O M M A N D
7 codconnect
8 coddisconnec
t
10 ssh.genkeys
11 ssh.clearkey
s

List of get/set commands

The following table is a partial list of get and set commands which may be performed via SMS.
C O M M A N D N A M E
get status get status
get sessionhistory get sessionhistory
set syslogserver set
syslogserver=123.45.67.89:514
set cod set cod=1
get cod get cod
get codstatus get codstatus
set coddialport set coddialport=on,53
get coddialport get coddialport
set codonline set codonline=20
get codonline get codonline
set codminonline
set codminonline=10
get codminonline get codminonline
set codredial set codredial=5
get codredial get codredial
NTC-220 – User Guide
UG01028 v1.2 March 2019
ftp://username:password@serveraddress/directory/filename.cdi
Causes the router to activate the PDP context when the Connect on demand feature is
enabled.
Causes the router to de-activate the PDP context when the Connect on demand feature is
enabled.
Instructs the router to generate new public SSH keys.
Instructs the router to clear the client public SSH key files.
Table 38 – List of basic SMS diagnostic commands
E X A M P L E
D E F I N I T I O N
D E S C R I P T I O N
Returns the Module firmware version, LAN IP
Address, Network State, Network operator and
Signal strength.
Returns the time and date of recent sessions along
with the total amount of data sent and received for
each session.
Sets a remote syslog server IP or hostname and port.
Enables or disables Connect on demand.
Returns the enable/disable status of the Connect on
demand feature.
Returns the connection status of the Connect on
demand feature.
Sets the Connect on demand feature to connect only
when traffic is received on the specified port.
Returns the Connect on demand port filter status and
list or filtered ports.
Sets the router to stay online for at least X minutes
when data activity is detected.
Returns the number of minutes the router is
configured to stay online when data activity is
detected.
Sets the router to stay online for a minimum of X
minutes after connecting.
Returns the minimum number of minutes the router
should stay online after connecting.
Sets the number of minutes that the router should
not attempt to redial after hanging up.
Returns the number of minutes that the router is
configured to not attempt to redial after hanging up.
132 of 193
© NetComm Wireless 2019