NetComm NTC-220 User Manual page 133

C O M M A N D N A M E
set coddisconnect set coddisconnect=0
get coddisconnect get coddisconnect
set codconnectreg set codconnectreg=30
get codconnectreg get codconnectreg
set codrandomtime set codrandomtime=3
get get codrandomtime
codrandomtime
set codverbose set codverbose=1
get codverbose get codverbose
set codignore.icmp
set codignore.icmp=1
get codignore.icmp
get codignore.icmp
set codignore.tcp
set codignore.tcp=1
get codignore.tcp
get codignore.tcp
set codignore.udp set codignore.udp=1
get codignore.udp get codignore.udp
set codignore.dns set codignore.dns=1
get codignore.dns get codignore.dns
set codignore.ntp set codignore.ntp=1
get codignore.ntp get codignore.ntp
set codignore.ncsi set codignore.ncsi=1
get codignore.ncsi get codignore.ncsi
get plmnscan get plmnscan
set forceplmn set forceplmn=505,3
get forceplmn
get forceplmn
get pppoe
get pppoe
NTC-220 – User Guide
UG01028 v1.2 March 2019
E X A M P L E D E S C R I P T I O N
Sets the number of minutes after which the router
should disconnect regardless of traffic.
Returns the number of minutes the router is
configured to disconnect regardless of traffic.
Sets the number of minutes that the router should
regularly attempt to connect.
Returns the number of minutes that the router is
configured to regularly attempt to connect.
Sets the number of minutes that the router should
randomise the dial time by.
Returns the number of minutes that the router is
configured to randomise the dial time by.
Sets verbose logging on or off.
Returns the status of verbose logging.
Sets the router to ignore ICMP packets triggering
data activity detection.
Returns the status of the Ignore ICMP option.
Sets the router to ignore TCP packets triggering data
activity detection.
Returns the status of the Ignore TCP option.
Sets the router to ignore UDP packets triggering data
activity detection.
Returns the status of the Ignore UDP option.
Sets the router to ignore DNS traffic triggering data
activity detection.
Returns the status of the Ignore DNS option.
Sets the router to ignore NTP traffic triggering data
activity detection.
Returns the status of the Ignore NTP option.
Sets the router to ignore NCSI traffic triggering data
activity detection.
Returns the status of the Ignore NCSI option.
Instructs the router to perform a network scan and
returns the results by SMS.
Sets the operator to a manual selection made by the
user where "505" is the Mobile Country Code for
Australia. As no network type (e.g.. LTE/3G/2G) is
specified, it is selected automatically.
Returns the operator and network type selection
mode (Automatic/Manual), in addition to the MCC
and MNC values
Returns the PPPoE status, currently configured dial
string and service name
133 of 193
© NetComm Wireless 2019