NetComm NTC-220 User Manual page 148

4 Under the File uploads section, click the Choose a file button. Locate the firmware image file on your
computer and click Open. The firmware image is named ntc_220_x.xx.xx.x.cdi where the 'x' characters
represent the version number.
5 Click the Upload button. The firmware image is uploaded to the storage on the router.
6 The uploaded firmware is listed in the Uploaded files section. Click the Install link next to the file to begin
installing the firmware and then click OK on the confirmation window that appears.
7 The firmware is flashed and when it is complete, the router displays "The firmware update was successful"
and returns to the main Upload screen.
Note – Do not remove the power when the router's LEDs are flashing as this is when the firmware update is in process.
The installation is complete when the countdown reaches zero. The router attempts to redirect you to the
Status page.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 139 – File upload
Figure 140 – Uploaded files
Figure 141 – Firmware flash process complete
148 of 193
© NetComm Wireless 2019